pc gaming screen tearing image
Markus Rus
I'll be just randomly browsing, be on netflix, or launch a PC game and the lap top gets blank white "tear" screen, goes "pewwwwwwww" and just shuts off. Clearly it shouldn't be doing this, anyone know what's going on or know how to fix it?
Answer
It might be related to a failed computer fan. If you boot up to play games, this consumes a considerable amount of electricity and heats your laptop up. Without a good cooling system, the electrical connections gets short-circuited and shuts down your laptop.
You may, however, try to clear the CMOS and reboot using the following procedure:
Procedure to Clear the CMOS
Laptop users can set the CMOS to its default settings by accessing the BIOS setup screen. Depending on the model of the laptop, the BIOS setup utility can usually be accessed by booting up your computer and tapping on the F1, F2, DEL, ESC or F10 keys while the computer boots up. Usually, it's either the F2 or DEL keys. You can refer to your laptop computer's manual on how to do this on your particular model. Some laptops display which key to press while booting up.
You will know if you are successful when you see a blue screen, black and white screen or similar simple interface with menus. Your mouse will not usually work so you will need to use the keyboard arrow keys.
Find the CMOS setup selection by selecting the menu and reset the CMOS values ot the default setting or an option to load the fail-safe defaults. Once you have chosen to load the default settings, you will be asked to select between a Yes and a No or Esc option. Of course, you should press Y to confirm. Once the default values have been loaded, make sure that you save and exit the setup screen. The computer will reboot. You should see your screen back to normal.
If it doesn't work, the problem is hardware related.
It might be related to a failed computer fan. If you boot up to play games, this consumes a considerable amount of electricity and heats your laptop up. Without a good cooling system, the electrical connections gets short-circuited and shuts down your laptop.
You may, however, try to clear the CMOS and reboot using the following procedure:
Procedure to Clear the CMOS
Laptop users can set the CMOS to its default settings by accessing the BIOS setup screen. Depending on the model of the laptop, the BIOS setup utility can usually be accessed by booting up your computer and tapping on the F1, F2, DEL, ESC or F10 keys while the computer boots up. Usually, it's either the F2 or DEL keys. You can refer to your laptop computer's manual on how to do this on your particular model. Some laptops display which key to press while booting up.
You will know if you are successful when you see a blue screen, black and white screen or similar simple interface with menus. Your mouse will not usually work so you will need to use the keyboard arrow keys.
Find the CMOS setup selection by selecting the menu and reset the CMOS values ot the default setting or an option to load the fail-safe defaults. Once you have chosen to load the default settings, you will be asked to select between a Yes and a No or Esc option. Of course, you should press Y to confirm. Once the default values have been loaded, make sure that you save and exit the setup screen. The computer will reboot. You should see your screen back to normal.
If it doesn't work, the problem is hardware related.
What causes input lag and screen tearing on pc games?
Bullwinkle
i have a decent pc, but most of the games just deosn't feel that smooth even on lower settings. Im not saying its lag, i get minimum 40 fps, but when for example i move mouse fast it got a little delay, why it cant be so smooth like in quake 3 ? And no i have not v sync enabled.
Answer
If you don't have V-sync enabled, that would be why.
When you move around a lot, the screen is moving the particles on the screen at different frame rates (which causes screen tear). V-sync locks the FPS of all the pixels of the screen, so that none are moving faster than another.
If you don't have V-sync enabled, that would be why.
When you move around a lot, the screen is moving the particles on the screen at different frame rates (which causes screen tear). V-sync locks the FPS of all the pixels of the screen, so that none are moving faster than another.
Powered by Yahoo! Answers
Title Post: My Dell XPS M1530 will get a blank white screen and shut down randomly or when I launch any PC games?
Rating: 100% based on 998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment